This kiln will be drop shipped direct to you from the Paragon factory. Details of your order and the shipping costs will be verified with you. Additional options and accessories are available. Contact us to order to your specifications.
Paragon BlueBird XL 120V Kiln
The Paragon BlueBird XL 120V Kiln features new sinusoidal “wavy” elements, which are embedded close to the inner surface of the high-tech, vacuum-formed ceramic fiber top. This is an improvement over our earlier embedded coiled elements because the “wavy” elements are mounted closer to the surface. This enables the elements to radiate heat faster for longer element life. The ceramic fiber top reduces dust inside the kiln.
The BlueBird XL now features ceramic fiber walls and bottom, which replace the firebrick walls and bottom of earlier kilns. The BlueBird XL, with its space-age ceramic fiber, heats faster than ever.
Improved double doors with gaskets
Both doors are 3 1/2” x 10” and mounted in a 4 1/4” high opening. The 3/4” gap under the doors is filled by flexible, high-temperature door gaskets, which help to hold in heat. The 2” thick ceramic fiber doors are twice the thickness of our original doors. The hinges are continuous across the top for extra longevity.
Bead mandrel holders
The kiln comes with one single and one double mandrel holder. The single holder supports rods or mandrels from one point; the double-cradle the rods at two points. The holders are held to the kiln by magnets so you can adjust the height. They are sturdy and heavy-duty for long life.
Rare-earth magnets hold doors open or closed
Rare-earth magnets hold the doors closed while the kiln is heating to annealing temperature. Phenolic knobs on the door handle stay cool to the touch. Use the switch on the front panel to turn off power to the controller when the kiln is not in use and to reboot the controller when needed.
We have added a glass rod warmer to the top of the kiln. Pre-heating the glass rods saves production time.
The steel base supports the kiln in two layers. The upper steel base supports and strengthens the firing chamber; the lower steel base covers the entire kiln bottom where it rests on your worktable. Electrical components are mounted to the lower base, away from the heat.
The Sentry Xpress digital controller is mounted under the kiln in an ergonomically sloped panel for easy operation. The design saves table space over kilns with a side switch box. The built-in base stays cool even during extended hold times for the long life of the electrical system. It is slotted to dissipate heat and comes with mar-proof plastic feet.
The BlueBird XL plugs into a standard household outlet. The kiln ships by convenient UPS/FedEx. It ships in a special carton with vacuum-formed padding to assure that the kiln will arrive safely.
And, of course, the BlueBird XL is made in Mesquite, Texas to exacting standards.
Features of the BlueBird XL
- 3-key digital Sentry Xpress controller
- 2 – 3 1/2” high doors with flexible high-temperature gasket
- Rare-earth magnets hold the doors open or closed
- The firing chamber is 8” deep measured with doors closed; 10” deep measured with doors open
- ceramic fiber firing chamber for rapid heating
- 2” thick ceramic fiber doors with flexible gaskets
- Mandrel holders attach to the kiln with magnets
- 1500°F maximum temperature
- Ceramic fiber roof with embedded elements
- Mar-proof plastic feet
- On-off safety switch
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.