Browse Categories
Shopping Cart
Your cart is empty.

Hot Glass Color
2227 5th Ave
Seattle, Wa 98121

Store Hours:
Mon-Fri: 9am-6pm
Sat & Sun: 10am-6pm

Graphite 12-in-1 Marble Mold
Price: $85.00

Detailed Description

12-in-1 Graphite Marble Mold
by Weaver Technologies
  • All surfaces are machined 1-15/16" to 2" x 4-1/8 x 4-1/8", overall length including the handle approximately 12" long.
  • 1/4" Diameter increments on one side and 1/8" Diameter increments on the other side.
  • The 3D cavities are extremely difficult to give accurate measurements.
  • Marble sizes on one side 3/8", 5/8", 7/8", 1-1/8", 1-3/8" and 1-5/8". Opposite side is 1/2", 3/4", 1", 1-1/4", 1-1/2" and 1-3/4".
The handle is a cast polyurethane handle bonded to a threaded rod running the length of the handle. We added a 2" long piece of porous carbon insulator sleeve at the bottom of the handle to reduce the heat transfer from the graphite. The threaded rod runs through the mold and is secured in place with flat washers, lock washers and nuts from both sides to prevent it from turning.